Automatic Sliding Gate Motors
High-speed Brushless DC (BLDC) sliding gate motors engineered for whisper-silent operation, zero thermal cutoffs, and sub-micron positioning. Designed to power residential gates, high-traffic commercial estates, and massive industrial cantilevers from 600 kg to 2,000 kg.
Glidell™ G-Series Sliding Gate Motor Lineup
Precision-engineered with aerospace-grade permanent magnet rotors and case-hardened steel helical gears.
Ultra-compact, whisper-silent motor for private villas. High speed opening with gentle soft-stop to eliminate gate track clatter.
- Motor Voltage 24V DC Brushless
- Max Travel Speed 20 meters / min
- Duty Cycle 100% Continuous
- Ingress Rating IP67 Submersible
- Limit Switches Non-contact Magnetic
- Battery Backup LiFePO4 Plug-in Ready
- Safety Anti-Crush EN 12453 Dynamic (<400N)
The benchmark for luxury residential compounds and high-frequency commercial entries. Heavy oil-bath bronze gearbox withstands 150+ daily cycles.
- Motor Voltage 36V DC Brushless
- Max Travel Speed 18 meters / min
- Duty Cycle 100% Continuous Duty
- Ingress Rating IP67 Monocoque
- Gearbox Material Case-Hardened Steel & Bronze
- Smart Integration Wi-Fi, Zigbee, DALI, ANPR
- Warranty 3-Year Full OEM Warranty
Built for massive commercial perimeters, industrial plants, and cantilevered sliding gates under high wind-load conditions.
- Motor Voltage 3-Phase Vector VFD Drive
- Max Travel Speed 15 meters / min
- Duty Cycle 24/7 Heavy Industrial
- Ingress Rating IP67 Cast Enclosure
- Gear Metallurgy Dual-Bearing Helical Steel
- Spares Availability 48-Hour Domestic Dispatch
- Manual Override Key-Operated Cam Release
Comprehensive Technical Comparison Table
| Feature / Parameter | G-600 BLDC (Residential) | G-1200 BLDC (Commercial) | G-2000 PRO (Industrial) |
|---|---|---|---|
| Maximum Gate Leaf Weight | 600 kg | 1,200 kg | 2,000 kg |
| Operating Voltage | 24V DC Brushless | 36V DC Brushless | 230V AC Input / 3-Phase Vector |
| Motor Power Consumption | 140 Watts | 260 Watts | 550 Watts |
| Sliding Gate Speed | Up to 20 m/min (Adjustable) | Up to 18 m/min (Adjustable) | Up to 15 m/min |
| Duty Cycle Rating | 100% Continuous Duty | 100% Continuous Duty | 100% Heavy Industrial |
| Ingress Protection Rating | IP67 Hermetic Seal | IP67 Hermetic Seal | IP67 Hermetic Seal |
| Operating Temperature Range | -20°C to +65°C | -20°C to +65°C | -25°C to +70°C |
| Pinion Module & Teeth | Module 4 / 16 Teeth Steel | Module 4 / 18 Teeth Steel | Module 6 / 20 Teeth Hardened Steel |
| Obstacle Safety Reversal | < 0.75 seconds (EN 12453) | < 0.75 seconds (EN 12453) | < 0.75 seconds (EN 12453) |
| Direct Spare Parts Guarantee | 48-Hour Domestic Dispatch | 48-Hour Domestic Dispatch | 48-Hour Domestic Dispatch |
Automatic Sliding Gate Motors FAQ
Brushless DC motors use permanent Neodymium magnets instead of carbon brushes or high-resistance AC coils. This means they run cool even under continuous back-to-back operation, eliminate thermal cutoffs during hot Indian summers, consume 60% less electricity, and effortlessly integrate with 24V battery backups and solar systems without expensive pure-sine wave inverters.
Most imported gate motors carry IP44 or IP54 ratings which easily allow moisture condensation inside the electronics. Glidell G-Series motors feature full IP67 hermetically sealed die-cast enclosures, double-lip silicone drive shaft seals, and conformal-coated electronic motherboards to resist water immersion and coastal saline humidity.
For residential gates up to 600kg, nylon-encased steel-core racks provide the quietest operation. For commercial and heavy architectural gates exceeding 800kg, galvanized Module 4 or Module 6 solid steel toothed racks with zinc plating are mandatory for maximum torsional rigidity and wind-load resistance.
Get an Engineer Sizing Report for Your Sliding Gate
Provide your gate length and estimated weight. Our technical desk will recommend the optimal motor model, rack specification, and wiring layout within 24 hours.